Experimental investigation of turbulent flow in smooth and longitudinal grooved tubes

Turbulent flow in tubes with and without longitudinal grooves is examined. The discovery of fine grooves forming a sort of streamline pattern on the body of sharks led to the expectation that the grooves on a surface reduce the momentum change, and thus the drag. To test this thesis, drag law, velocity profile and the profile of the velocity fluctuation were determined. Results show that for moderate Reynolds numbers the drag coefficient for grooved tubes is about 3 percent smaller than that of the smooth tubes. At higher Reynolds numbers, however, the drag coefficient for grooved tubes becomes larger than that for smooth tubes. No significant differences in the velocity profiles between grooved tubes and smooth tubes are found

Experimental studies on the stability and transition of 3-dimensional boundary layers

Three-dimensional unstable boundary layers were investigated as to their characteristic instabilities, leading to turbulence. Standing cross-flow instabilities and traveling waves preceding the transition were visualized with the hydrogen bubble technique in the boundary layer above the wall of a swept cylinder. With the sublimation method and hot film technique, a model consisting of a swept flat plate with a pressure-inducing displacement body in the 1 m wind tunnel was studied. Standing waves and traveling waves in a broad frequency are observed. The boundary layer of this model is close to the assumptions of the theory

J Fluorescence

The scope of this paper is to illustrate the need for an improved quality assurance in fluorometry. For this purpose, instrumental sources of error and their influences on the reliability and comparability of fluorescence data are highlighted for frequently used photoluminescence techniques ranging from conventional macro- and microfluorometry over fluorescence microscopy and flow cytometry to microarray technology as well as in vivo fluorescence imaging. Particularly, the need for and requirements on fluorescence standards for the characterization and performance validation of fluorescence instruments, to enhance the comparability of fluorescence data, and to enable quantitative fluorescence analysis are discussed. Special emphasis is dedicated to spectral fluorescence standards and fluorescence intensity standards

A Multiorganisational Study of the Drivers and Barriers of Enterprise Collaboration Systems-Enabled Change

Enterprise Collaboration Systems (ECS) are emerging as the de facto technology platform for the digital workplace. This paper presents findings from an in-depth, multiorganisational study that examines the drivers and barriers of ECS-enabled change from two perspectives: i) the company initiating and driving the project and ii) key practitioners responsible for delivering the change. Data is collected from ECS using companies via a survey and face-to-face workshops, analysed using qualitative content analysis methods to identify categories of change and then synthesised to provide a rich classification and visualisation of the drivers, barriers, motivations and pain points (DBMP) to ECS-enabled change. This is followed by a discussion of the similarities and differences between drivers and barriers from both personal and company perspectives. The paper concludes by exploring the potential of the research and visualisation methods used in this work to provide the foundation for the longitudinal study of ECS-enabled change

Multisite Binding of Drugs and Natural Products in an Entropically Favorable, Heteroleptic Receptor.

The cavities of artificial receptors are defined by how their components fit together. The encapsulation of specific molecules can thus be engineered by considering geometric principles; however, intermolecular interactions and steric fit scale with receptor size, such that the ability to bind multiple guests from a specific class of compounds remains a current challenge. By employing metal-organic self-assembly, we have prepared a triangular prism from two different ligands that is capable of binding more than 20 different natural products, drugs, and steroid derivatives within its prolate cavity. Encapsulation inflates the host, enhancing its ability to bind other guests in peripheral pockets and thus enabling our system to bind combinations of different drug and natural product cargoes in different locations simultaneously. This new mode of entropically favorable self-assembly thus enables central encapsulation to amplify guest-binding events around the periphery of an artificial receptor.This work was supported by the UK Engineering and Physical Sciences Research Council (EPSRC EP/P027067/1) and the European Research Council (695009). We thank Cambridge Australia Scholarships (FJR) and the European Union’s Horizon 2020 research and innovation program, Marie Sklodowska-Curie Grant 642192 (JPC) for Ph.D. funding

An Autocatalytic System of Photooxidation-Driven Substitution Reactions on a Fe^II₄L₆Cage Framework

The functions of life are accomplished by systems exhibiting nonlinear kinetics: autocatalysis, in particular, is integral to the signal amplification that allows for biological information processing. Novel synthetic autocatalytic systems provide a foundation for the design of artificial chemical networks capable of carrying out complex functions. Here we report a few Feᴵᴵ₄L₆ cages containing BODIPY chromophores having tuneable photosensitizing properties. Electron-rich anilines were observed to displace electrondeficient anilines at the dynamic-covalent imine bonds of these cages. When iodoaniline residues were incorporated, heavy-atom effects led to enhanced ¹O₂ production. The incorporation of (methylthio)aniline residues into a cage allowed for the design of an autocatalytic system: oxidation of the methylthio groups into sulfoxides make them electron-deficient and allows their displacement by iodoanilines, generating a better photocatalyst and accelerating the reaction.This work was funded by the European Research Council (259352).This is the author accepted manuscript. The final version is available from Wiley via http://dx.doi.org/10.1002/ange.20150704

Stacking Interactions Drive Selective Self-Assembly and Self-Sorting of Pyrene-Based M(II)4L6 Architectures.

Subcomponent self-assembly of two isomeric bis(3-aminophenyl)pyrenes, 2-formylpyridine and the metal ions Fe(II), Co(II), and Zn(II) led to the formation of two previously unidentified structure types: a C2-symmetric M(II)4L6 assembly with meridionally coordinated metal centers, and a C3-symmetric self-included M(II)4L6 assembly with facially coordinated metal centers. In both structures the meta linkages within the ligands facilitate π-stacking between the pyrene panels of the ligands. A C2h-symmetric M(II)2L2 box was also obtained, which was observed to selectively bind electron-deficient aromatic guests between two parallel pyrene subunits. Similar donor-acceptor interactions drove the selective self-assembly of a singular M(II)4L4L'2 architecture incorporating both a pyrene-containing diamine and an electron-deficient NDI-based diamine. This heteroleptic architecture was shown to be thermodynamically favored over the corresponding homoleptic M(II)4L6 and M(II)4L'6 complexes, which were nonetheless stable in each others' absence. By contrast, an isomeric pyrene-based diamine was observed to undergo narcissistic self-sorting in the presence of the NDI-based diamine.This work was supported by the UK Engineering and Physical Sciences Research Council (EPSRC). D.A.R. acknowledges the Gates Cambridge Trust for Ph.D. funding (Gates Cambridge Scholarship). We thank the EPSRC Mass Spectrometry Service at Swansea for carrying out the high resolution mass spectrometry and Diamond Light Source (UK) for synchrotron beamtime on I19 (MT8464). We also thank the NMR service team at the Department of Chemistry, University of Cambridge for performing some NMR experiments.This is the final version of the article. It first appeared from the American Chemical Society via http://dx.doi.org/10.1021/jacs.5b0992

Stimuli-Responsive Metal-Ligand Assemblies.

The Engineering and Physical Sciences Research Council and the European Research Council are acknowledged for financial support.This is the accepted manuscript of a paper published in Chemical Reviews (McConnell AJ, Wood CS, Neelakandan PP, Nitschke JR, Chemical Reviews (2015) 115(15):7729-7793. doi:10.1021/cr500632f). The final version is available at http://dx.doi.org/10.1021/cr500632

Anion Pairs Template a Trigonal Prism with Disilver Vertices.

Here we describe the formation of a trigonal prismatic cage, utilizing 2-formyl-1,8-naphthyridine subcomponents to bind pairs of silver(I) ions in close proximity. This cage is the first example of a new class of subcomponent self-assembled polyhedral structures having bimetallic vertices, as opposed to the single metal centers that typically serve as structural elements within such cages. Our new cage self-assembles around a pair of anionic templates, which are shown by crystallographic and solution-phase data to bind within the central cavity of the structure. Many different anions serve as competent templates and guests. Elongated dianions, such as the strong oxidizing agent peroxysulfate, also serve to template and bind within the cavity of the prism. The principle of using subcomponents that have more than one spatially close, but nonchelating, binding site may thus allow access to other higher-order structures with multimetallic vertices.European Research Council (695009) and the UK Engineering and Physical Sciences Re‐ search Council (EPSRC, EP/P027067/1). European Union's Horizon 2020 research and innovation program, Marie Sklodowska‐Curie Grant (642192)

Sialic acids on B cells are crucial for their survival and provide protection against apoptosis.

Sialic acids (Sias) on the B cell membrane are involved in cell migration, in the control of the complement system and, as sialic acid-binding immunoglobulin-like lectin (Siglec) ligands, in the regulation of cellular signaling. We studied the role of sialoglycans on B cells in a mouse model with B cell-specific deletion of cytidine monophosphate sialic acid synthase (CMAS), the enzyme essential for the synthesis of sialoglycans. Surprisingly, these mice showed a severe B cell deficiency in secondary lymphoid organs. Additional depletion of the complement factor C3 rescued the phenotype only marginally, demonstrating a complement-independent mechanism. The B cell survival receptor BAFF receptor was not up-regulated, and levels of activated caspase 3 and processed caspase 8 were high in B cells of Cmas-deficient mice, indicating ongoing apoptosis. Overexpressed Bcl-2 could not rescue this phenotype, pointing to extrinsic apoptosis. These results show that sialoglycans on the B cell surface are crucial for B cell survival by counteracting several death-inducing pathways